KNAC0418A

Nactus SMART Optical System with 4 Lenses
Module dimensions: 55,88mm x 55,88mm side – Height: 7,75mm – Lens pitch: 27,94mm
IESNA Type III

Material: PMMA
Full angle at 50% from maximum: ~ 145° x 120°
Full angle at 10% from maximum: ~ 175° x 180°
The light spots here represented refer to tests carried out with LEDs with 3mm dome, ~ 250lm
LED (Nominal LED Luminous Flux): 250lm
IES TYPE (IESNA Distribution Type): III
LONGITUDINAL (Longit. Classific. Categ.): SHORT

Nactus SMART. Different models offer countless opportunities to customize your lighting fixtures. Each of the modules performs a different light spot. Use modules of the same type or mix different models in the same structure to create lighting fixtures of desired dimensions and configurations.
The arrow mark on the module surface helps a correct positioning in your application:
– Street Lighting = the arrow points to the street side
– General Lighting, Indoor/Outdoor = the arrow follows the light direction from the LED source
Insert a screw into the central hole to fasten the module to the PCB. The modules hold the part number for easy identification. Clear fine-frosted finishing.
No need to develop any photometric analysis: every model has individual photometry.
Designed for LEDs of latest generation, from 100 lm/W to 300 lm/W.

The panel come IP protected with a silicone gasket placed in the perimeter groove.

On request, the multi-lens array is available with PCB for testing (LED Board (DEMO)).
The NACTUS Optical System is Patented.

————————————————– Part Number ————————————————-

KNAC0418A [optic]
KNAC0418A1X [optic + LED Board (DEMO)]

KNAC0418AIP [optic with a silicone gasket (IP protected )]
KNAC0418AIP1X [optic with a silicone gasket (IP protected ) + LED Board (DEMO)]

——————————————— Typical Applications ———————————————
– IESNA Type III
– Narrow Streets
– Outdoor
– Street & Area lighting
– Wide streets
– Wide-area lighting